SLSC Fault Insertion Module

Products
USB/Ethernet Converter Products

DEICO offers a complete range for sub products to get the best performance.

Battery Management System (BMS) Test Products

Battery test products are safe, efficient, and accurate simulation products for new storage technologies.

Navigation System Products

These products are equipped with advanced features.

Bus Couplers

DEICO offers diverse bus couplers to customer needs.

SLSC Modular Systems

SLSC reduces the time spent on common needs in test systems.

DTS

DEICO ensures high testing capacity for advanced board designs.

Dynamic Test Systems

These systems ensure reliability across diverse mission scenarios.

Other Test System Products

This series offers a wide range of test and measurement equipment products.

Switching & Data Acquisition Systems

All test systems need data acquisition structures to collect and analyze data.

JTAG

JTAG Technologies is boundary-scan.

USB/Ethernet Converter Products

These products are designed for use in DEICO solutions and all required test sys..

Battery Management System (BMS) Test Products

The introduction of new storage technologies and the interconnection of multiple..

Navigation System Products

DEICO's navigation system products are equipped with advanced features such as h..

Bus Couplers

Bus protocol is a very common and reliable bus standard which is widely used for..

SLSC Modular Systems

DEICO SLSC modules extend the platforms with the ability to add custom front-end..

DTS

DTS series stands out for its adaptability, extensive range of testing functions..

Dynamic Test Systems

DEICO specializes in the development of dynamic test systems that evaluate the i..

Other Test System Products

The 'Other Test System Products' series offers a wide range of products, each de..

Switching & Data Acquisition Systems

All test systems need data acquisition structures to collect and analyze data...

JTAG

JTAG Technologies is boundary-scan.Since the early 1990s they have lived and bre..
Solutions
Company
Support
Career
Contact

I Agree to Privacy Policy

Send

Part Number

Product

Quantity

SLSC Fault Insertion Module

PART NUMBER : DE9010

DE9010 SLSC Fault Insertion Module is an add-on board for particular SLSC modules; and it offers a set of relay channels to be used for simulating open, short and/or interrupted connections in hardware-in-the-loop (HIL) testing. One can connect input signals either to fault buses on the rear transition interface (RTI) or to external devices such as other test instruments and units under test (UUTs), and even other modules through the second connector on the front of the SLSC module.

Overview

The key features of DE9010 are listed below.

16 differential or 32 single-ended channels
220VDC, 250VAC switching voltage, 2A and 60W per channel
Flexibility in connection (i.e., either through RTI or the front panel of the SLSC module)

DE9010 is compatible with IEC 60068-2-1/ IEC 60068-2-2/ IEC 60068-2-78/ IEC 60068-2-27/ IEC 60068-2-64/ EN 61326 (IEC 61326) / EN 55011 (CISPR 11) / AS/NZS CISPR 11/ FCC 47 CFR Part 15B/ ICES-001 standards.

Areas of application include:

Open-circuit simulation of the input signal pairs
Short-circuit simulation of the input signal pairs
Fault insertion

Specifications

Electrical

Specification	Minimum	Maximum	Notes
Switching Voltage	―	220VDC 250VAC	―
Rated Current	―	2A	2A@30VDC, 0.27A @ 220VDC 0.5A@125VAC
Switching Power	―	60W	―
Update Time	3ms	13ms	Operate time : 1ms typ. Release time: 3ms Typ. Bounce Time : 1ms Typ.
Contact Resistance	50mΩ	150mΩ	Max: Longest path is Chosen
Lifetime	1x10⁵ operations 5x10⁵ operations	―	@60W applications @30W applications
Bandwidth	―	20MHz	―

Physical

Specification	Typical
Dimensions	178.755mm x 57.811mm x 15.5mm

Environmental

Specification	Condition	Value
Operating Humidity	Relative, non-condensing	10% - 90%
Storage Humidity	Relative, non-condensing	5% - 95%
Operating Temperature	Forced-air cooling from chassis	0 C° - 40 C°
Storage Temperature	Non-operational	-40 C° - 85 C°